SpeedFan 4.52
更新細節：
- added full IPMI support.
- added full support for IT IT8771E.
- added full support for Intel Sunrise Point (Z170) SMBus.
- added full support for STMicro STTS2004.
- added full support for NCT6793D.
- added full support for Giantec GT34TS04 and GT34TS02.
- added support for Atom E3800 SMBus.
- added support for Atom C2000 SMBus.
- added support for Fintek F71878A/F71868A at non standard addresses.
- enabled SMBus on Intel 6 Series / C20x, if needed.
- fixed SCSI_PASS_THROUGH access on some systems.
- skipped accessing those hard disks that return the ID Sector from another disk.
- fixed Nuvoton NCT6791D and NCT6792D sixth fan readings.
- added support for alternate registers of NCT6793D.
- fixed German translation for CPU Usage.
版本下載：SpeedFan 4.52
SpeedFan 4.51
更新細節：
* Added full support for Fintek F71811U
* Added full support for Nuvoton NCT6106D
* Added full support for Nuvoton NCT6792D
* Added full support for Fintek F71878A/F71868A
* Added full support for ITE IT8783F
* Added full support for Intel C610/X99 SMBus
* Added full support for ITE IT8620E
* Added support for Nuvoton NCT6683D
* Fixed Fintek F71808A PWM MODE setting
* Added PWM 4 ENABLE and PWM 5 ENABLE to advanced options for the ITE IT8620E to enable or disable PWM 4 and 5 writes
* Smbus access is disabled for Sapphire PC-AM2RD790
* Fixed fan speed readings on the NCT6791D
* SCSI Scan is automatically disabled if iastorA.sys driver is installed - use /DOSCSISCAN to force enable it
* Fixed Fintek F71811U PWM TYPE advanced setting
* Greatly improved RAM SPD decoding for SDRAM, DDR, DDR2, DDR2 FB-DIMM and DDR3
* Improved identification of newer revisions of Microchip MCP9843 and MCP98243
* Fixed STTS3000 and STTS2002 temperature reporting
* Fixed old IT8705F identification
* Events can now be triggered if something happens for, at least, up to 9999 times (it was 99)
* Battery charge is now properly updated on the EXOTICS tab
* NCT6791D IO Space accessibility is now tested upon resume from suspend and fixed, if needed
* Restored DIMM access on latest Intel chipsets
* Added manifest to improve support up to Windows 10
* Configuration dialog now always opens at the center of the main window
版本下載：SpeedFan 4.51
SpeedFan 4.50
更新細節：
- Added full support for Nuvoton NCT6791D (including fan control)
- Improved external (USB) hard disk detection (some were not properly detected on Windows 8)
- Added a new method to access hard disks connected to 3ware RAID controllers (works on 64 bit systems too)
- Added support for Intel core temperature (Family 06h Model 3Ch)
- Added support for Intel core temperature (Family 06h Model 3Eh)
- Added support for AMD Family 15h temperature
- Added support for AMD Family 16h temperature
- Added support for Intel 8 Series SMBus
- Added support for Intel 8 Series Mobile SMBus
- Added support for Intel 9 Series SMBus
- Added Nuvoton NCT6779D/NCT6791D advanced option to choose between PWM and DC output for System Fan (PWM 1)
- Changed the way NCT6779D and NCT6791D read fan speeds
- Added 4 more temperature readings to NCT6779D
- Added Fintek F71808A advanced setting: PWM TYPE 3
- Refined Fintek F71808A description for PWM MODEs
- Added preliminary support for ITE IT8620E temperatures and fan speeds
- Fixed a minor typo that caused Fintek F71808A to not show some temperatures properly
版本下載：SpeedFan 4.50
SpeedFan 4.49
更新細節：
- fixed a typo that caused ACPI temperatures to be reported wrongly on some Windows 7
- changed the name of the installer to improve compatibility with Windows 8
版本下載：SpeedFan 4.49
SpeedFan 4.47
更新細節：
- Added support for hard disks through CSMI (Intel Matrix RAID and Intel Rapid Storage, for example)
- Added support for Intel 7 Series SMBus
- Added full support for NCT6779D
- Added full support for Fintek F71808A
- Fixed temperature reading for Intel Ivy Bridge
- Fixed ATK0110 support on several motherboards
- Switched to the new HddStatus service (it works on Unix/Linux too now)
- ARECA RAID support is not longer probed on Windows 2K
- Limited DELL Studio 1558 support to the PWM alone for system stability
- Added support for Seagate FreeAgentDesktop and FreeAgent USB enclosures
- Added /NOINTELQST command line parameter
- TDELLSensor now handles resume from suspend
版本下載：SpeedFan 4.47
SpeedFan 4.46
更新細節：
- greatly improved DELL support
- nVidia I2C support works again with driver 275+
- now ATI Radeon support resets Manual Fan Control to the state it had when SpeedFan was started (no more unexpected video card fan set to 100% on program exit)
- added support for Intel X79 (Patsburg) SMBus
- added support for ServerWorks HT1000 SMBus
- added SAT support for USB enclosures
- added support for USB enclosures using SunPlus, IoData and Logitech chipsets
- added voltage reading tweaks and configurations for several Intel motherboards
- added full support for Fintek F71858AD
- rewritten Areca RAID support and improved support for Areca SAS controllers
- slightly refactored hard disk USB vendor guessing
- added support for AMD Family 12h (LLano) temperature
- added support for AMD Family 14h (Bobcat) temperature
- ATK0110 tries to find the best interface when multiple ones are available in ACPI BIOS (please, report if support is broken for your motherboard model)
- added preliminary support for Fujitsu-Siemens Hades
版本下載：SpeedFan 4.46
SpeedFan 4.45
更新細節：
- added full support for ATI RADEON video cards (including CrossFire configurations and fan control)
- completely rewritten DELL support
- DELL support is now enabled on a wider range of models
- added full support for ITE IT8772F
- added support for Fintek F71889A
- added full support for SMSC EMC2103-1 and SMSC EMC2103-2
- added support for Fintek F71869AD
- added support for Fintek F71862 at unusual addresses
- preliminary support for SMSC SCH5317
- fixed Nuvoton W83627DHG-P PWM MODE advanced settings
- fixed ASUS ATK0110 readings on several motherboards
- fixed ATK0110 support on some Asus motherboards
- enabled SMBus on Intel ICH9M-E, if needed
- added full AMD Hudson-2 SMBus support
- TACPISonySensor support is now probed on all SONYs
- fixed multiple glitches and bug related to Advanced Fan Control UI
- in Advanced Fan Control dialog, control points can be fine tuned (+1,-1,+10,-10) using the right mouse button
- SMART Fitness synthetic value now is more stringent with some specific issues, reporting 0% in some cases that require immediate attention
版本下載：SpeedFan 4.45
SpeedFan 4.44
更新細節：
- added full support for ATK0110
- added Advanced Fan Control including a graphical UI for configuration
- DELL support is now working on 64 bit systems too
- DELL support can change fan speeds, but if the BIOS is overriding it, there is little SpeedFan can do
- added support for ST STTS3000 and ST STTS2002 DIMM temperature sensors
- reported temperatures and fan speed on Sony Vaio VGN-FW21E
- fan speed is reported on some ASUS laptops with ATK0100 (like the F81Se and the K52JT)
- added preliminary identification of Fintek F71862
- PWM values can now be logged too
- temperatures are no longer tied to every fan speed as a default
- added F71809 PWM setting and reading
- improved SMART hard disk temperature reading if multiple attributes seem to report it
- rebuilt ARECA DLL with latest library and improved Areca RAID support
- more aggressive behaviour setting PWMs (this might help on systems where something else tries to change them)
版本下載：SpeedFan 4.44
SpeedFan 4.43
更新細節：
- restored full nVidia video card support
- hard disk finding now uses more stringent rules that lead to a much faster program startup
- fixed configuration issues with multiple nVidia video cards on the same system
- greatly improved User Interface responsiveness
- administrator privileges are now required and enforced to run SpeedFan
- added full support for Nuvoton W83627DHG-P, including PWM control
- added full support for Nuvoton NCT6776F, including PWM control
- added full support for Fintek F71808E, including PWM control
- added full support for Fintek F71809, including PWM control
- added full support for ITE IT8728F, including PWM control
- added full support for EMC2113, including PWM control
- added full support for Nuvoton W83L771
- added full PWM control for ITE IT8721F
- added support for several JEDEC JC 42.4 compliant sensors
- fully verified ITE IT8721F fan reading and control
- improved support for ACPI Thermal Zone temperatures reporting
- fixed Nuvoton W83667HG PWM MODE advanced settings
- fixed Nuvoton W83667HG-B PWM MODE advanced settings
- fixed Nuvoton W83677HG-I PWM reading
- fixed Winbond W83791D and Winbond W83792D TEMP2 and TEMP3 readings
- fixed Nuvoton W83627DHG, W83627EHF and W83667HG PWM TYPE settings
- fixed ITE IT8728F H/M identification
- fixed ITE IT8728F advanced properties support
- fixed ITE IT8720F PWM control
- fixed PWM readings for fans 4 and 5 on some ITE IT8712F
- added support for 3 additional temperature readings for Nuvoton W83677HG-I
- added support for Vtt voltage reading on ADT7490
- added Fintek F71858 support for fans, PWMs and advanced options
- improved detection of AD7417 to avoid false identifications
- Intel Core temperature are now properly read for 2nd Generation Intel Core Processor Family (Sandy Bridge)
- TIntelCoreSensor avoids reading temperatures from threads resulting from Hyper-Threading
- fixed temperature reporting on some hard disks that do not expose the usual SMART attribute
- added identification of Fintek F71869F
- added preliminary identification of ITE IT8772F
- added preliminary detection of Asus A8000B
- fixed a bug that prevented access to the SMBus on some ATI southbridges
- voltage scans are no longer automatically enabled for several ITE chips
- added preliminary identification for Fintek F71859
- added identification of Fintek F71809 and Fintek F71859
- added full support for Intel 6 Series SMBus
- added Intel NM10 SMBus enabler
- added full support for Intel ICH10 82801JD/DO SMBus
- /NONVIDIAI2C command line parameter is properly honoured again
- fixed a nasty bug in Intel SMBus support routines that could lead to releasing SMBus ownership at the wrong time
- improved Intel SMBus routines
- added exact voltage readings for Intel DH61BE, DH61CR, DH61DL, DH61WW, DH67BL, DH67CL, DH67GD, DH67CF, DP67BA, DP67DE, DP67BG, DB65AL, DQ67EP, DQ67OW, DQ67SW, DX58OG
- improved voltage readings for Asus P8P67 DeLuxe, P8P67 and P8P67-M
- pre-built configuration support has been added
- pressing on the left of the tabs on the main form no longer closes the program
版本下載：SpeedFan 4.43
SpeedFan 4.42
更新細節：
- greatly improved nVidia video card support
- added full access to hardware monitor chips available on several nVidia video cards (enabled I2C writes to allow fan speed control too)
- improved Intel QST support
- Intel QST now checks first for 2.0, then falls back to 1.0, if needed
- added support for external USB drives using JMicron controllers
- fixed fan speed computation for several Analog Devices chips (ADM1027, ADT7463, ADT7475, ADT7476, ADT7468, ADT7473, ADT7490) when configured for non standard number of pulses per revolution
- MUTEXes used to synchronize with other tools while accessing buses are now defined Global
- fixed CPU usage bars size on the main window
- enabled SMBus access on ICH10 and ICH10R, if needed
- if SpeedFan service is unavailable, a message dialog is shown and the program stops running
- added scan exceptions for Asus P5N-T DELUXE and Intel DX58SO
- SEND REPORT now includes a list of ACPI devices found
版本下載：SpeedFan 4.42
SpeedFan 4.41
更新細節：
- added full support for Intel 5 Series/3400 Series SMBus
- added full support for Intel QST 2.x
- added full support for fan control for Intel QST
- added full support for Fintek F71889F
- added full support for Fintek F71889ED
- added full support for SB8x0 SMBus
- added full support for Nuvoton W83677HG-I
- added full support for Nuvoton W83667HG-B
- added SB7xx/8xx PM2 fan speed readings and fan control
- added full support for MCP98242
- added full support for CAT34TS02
- added support for ITE IT8721F
- added support for USB hard disk enclosures with Cypress chipset
- added W83791D advanced settings for PWM MODEs
- improved ADT7490 PWM MODE advanced settings
- added ADVANCED options for Fintek F75387 PWM MODEs
- fixed Fintek F75387F PWM setting
- enabled SMBus on Intel ICH9-M, if needed
- added detection of LIS331DL
- added Intel QST 2.x advanced option to revert back to AUTO fan control
- upon resume from suspend only those fans that are automatically variated are initially set to 100%
- identified more CPUs
- Intel Atom Series 300 Tjmax set to 90C
- HECI support works only on Windows 2000 and later
- AMCC/3ware support works only on Windows 2000 and later
- added more names for SMART attributes
- added a new option to CONFIGURE / OPTIONS to disable SMART Summary Error Log on program start (this can dramatically improve SpeedFan startup time)
- the UI is now updated whenever new SMART data is read from the selected hard disk
- now, in CONFIGURE / EVENTS, when you press UPDATE to change some event, the editing fields are automatically cleared and the OK button is automatically enabled
- restored access to SMART attributes on AdvSmart, Areca and AMCC/3ware connected drives in Event configuration window
- events can now react to FITNESS and PERFORMANCE values of SMART hard disks
- added NOADVSMARTSCAN command line switch
- the first line of the email sent by an EVENT now has been changed to include the Machine Name
版本下載：SpeedFan 4.41
SpeedFan 4.40
更新細節：
- improved identification of Winbond W83667HG
- W83667HG has its own support code now
- W83667HG PWM MODE settings now work properly and can be used to change fan speeds
- fixed a minor bug in temperature readings of EMCT03
- fully included data from TPWS002 Intel Document about Tjmax values
- added support for ADP3228 fan reading
- AdvSmart no longer links a drive if SMART data has bad checksums
版本下載：SpeedFan 4.40
SpeedFan 4.39
更新細節：
- added full support for Fintek F71889F, even at unusual addresses
- added support for a new method to access SMART data
- added support for SCSI and SAT hard disk SMART access
- added full support for SuperMicro PWS-865-PQ PSU
- added full support for Winbond W83795G
- added full support for SMSC EMC1402
- added SHORT and EXTENDED OFF-LINE SMART TEST in SMART tab. This feature works on a number of supported interfaces and not on all of them
- added voltage readings for Winbond W83793G
- properly read Tjmax on Core i7 based Xeons
- relabeled IT8512F to IT8512E
- the tray hint is no longer updated if ShowStaticIcon is true
- the tray icon tooltip layout is now vertical
- added Fintek F72569DG detection
版本下載：SpeedFan 4.39
SpeedFan 4.38
更新細節：
added full support for AMCC/3ware SMART readings
added full support for Intel QST
added full support for ADT7470
added full support for ADT7462
added full support for nVidia MCP79 SMBus
added full support for SiS968 SMBus
added full support for Intel i7 internal core temperature reading
improved ITE IT8720F identification
added Fintek F71858 temperature readings
PC87360, PC87362, PC87363, PC87364, PC87366 do hide unavailable readings now
ProbeGL5xxSM now checks some more registers to try to avoid false detections
improved CPU identification routines
improved FB-DIMM support on some Intel chipsets
the exotics tab now shows the fitness of the hard disks connected to ARECA RAID controllers too
ARECA and AMCC/3WARE connected hard disks are now searched before the standard channels, trying to avoid aliased, merged or fake reported SMART data
added identification of Fintek F75125R
removed two debug messages related to UGURU3
added some debug code to try to support VIA CX700/VX700 SMBus
DELL SUPPORT is now checked on ATI SBx00, Intel 631xESB, ICH8, ICH9 and ICH10 too
disabled DELL support on 64 bit systems
added /NODELLSCAN command line parameter
fixed daylight saving time handling in event emails
added full support for Windows 7 32 and 64 bit
fixed a minor bug that caused the main window to be minimized when clicked
CONFIGURATION / SPEEDS SpinBoxes now allow manual edit
added some scan exceptions for Asus M2N-E and for Dell 0G841G
INSTALLER: improved OS identification
INSTALLER: fixed the ADMIN identification issue
版本下載：SpeedFan 4.38