Macrium Reflect 7.1.2963

# Bug Fixes:
* Save empty exclusions in File and Folder Filters
- A cleared folder exclusion filter in File and Folder backup would not cause the default value to be clear when next run. This has been resolved
* Server Plus Exchange backup error
- A Server reboot could occur during an Exchange Backup if the backup driver code was paged out of memory. This has been resolved.

# Bug Fixes:
* System error when mounting FAT32 file systems
- A bug with v5.3.7253 could cause a system error when mounting images containing FAT32 file systems. This has been resolved

# Server Plus - New features
- PST Export has been added to mailbox restore
- MSG Export has been added to mailbox restore
- Exchange backup performance has been improved.
- Mailbox restore wizard will no longer close on 'Finish' allowing for multiple restores in the same session.
- Error reporting and feedback of Exchange backups has been improved.
- Error reporting and feedback of mailbox item export has been improved.
# Bug Fixes:
* Backup Summary/Status Window
- A rare summary message corruption issue (due to multithreading) was reported. This has been resolved.
* File & Folder Backup Custom Backup Filename
- When using custom target filenames, it was possible to have the target filename be blank after adding source folders. This has been resolved.
* File & Folder Search Issue
- Searching for files to restore with a large collection of backup files could cause a hang. This has been resolved.
* File & Folder Password Issue
- Searching password protected backups prompted for password at an incorrect time. This has been resolved.
* Windows Events Issue
- A Server Edition patching issue resulted in Windows Events not being generated. This has been resolved.
# Server Plus - Bug Fixes
- Exchange backup was reporting incorrect I/O performance counters. This has been resolved.
- Mailbox item export could crash on some systems. This has been resolved.
- SQL Backup would crash if empty headers were retrieved during the backup. This has been resolved.
- Exchange 2010 mailbox restore encountered NLS issues when finding store folders. This has been resolved.
- Mailbox restore encountered an issue when detecting 32 bit Exchange installation on 64 bit platforms. This has been resolved.
- EML data was not being correctly restored for some emails. This has been resolved.
- Journal entry attachments were not being restored correctly. This has been resolved.
- Exchange 2010 Journal types were not being restore correctly. This has been resolved.

# New:
* Server Edition - SQL Log truncation
* Allow for selective deletion of Microsoft SQL Server logs after backup.
* Server Edition - Exchange Log truncation
* Allow for selective deletion of Microsoft Exchange logs after backup.
* File & Folder Search
* File and Folder Search will now only prompt once for a password if multiple backup files are selected.
* Server Plus - New features
> Backup, restore and mailbox restore functionality has been added for Exchange Server 2013.
> Users can now right click mail items and export them as text or EML file.
> Email items can be viewed by double clicking them, along with attachment save option.
> Users can now verify Exchange backup sets.
> Users can now mount Exchange backups for file access.
> Mailbox restore read of items has been greatly increased.
> Mailbox restore now shows progress of transaction log file replay into the database during mount.
# Bug Fixes:
* Partition scan issue
> Some customers reported a crash dump when scanning the partitions on disks. This has been resolved.
* ReDeploy issue
> An instance was reported of ReDeploy not working with LSI 3ware 9000 Series RAID drivers. This has been resolved.
* Clone & Restore issue
> Clone or restore processes could fail if the backup file bitmap size was reported incorrectly. This has been resolved.
* Shell Extension Comment issue
> The Macrium Reflect shell extension was not showing multi-line comments correctly. This has been resolved.
* Server Plus Bug Fixes
> The Exchange VSS Replication Writer would occasionally be incorrectly misidentified as the main Exchange VSS Writer.
> The mailbox restore UI was incorrectly not selecting child folder content for restore.
> The mailbox restore UI was occasionally displaying incorrect percentage values when reading folder content.
> The mailbox restore UI was showing incorrect cumulative folder item counts.
> Various minor issues with mailbox restore filter UI were discovered during further development.
> Mounted Exchange backup files did not have the unmount option.
> Cancelling the restore process during database dismount would cause a crash.

# Bug Fixes:
* "Bad file descriptor" error during cloning
- The error "Bad file descriptor" could cause a clone to fail. This has been resolved
* "Dynamic Disks not supported" Error
- Free and Standard editions. The error message "Dynamic Disks are not supported" could incorrectly be displayed when editing an XML file. This has been resolved.
* Windows PE driver copy problem
- If the source driver files are marked as 'Read Only' this could cause a copy failure when building the Windows PE rescue media. This has been resolved.
* Improved support for Linux systems using Grub 2

* New:
- Reduced memory usage when backing up large partitions.
> The amount of memory required when backing up multi-Terabyte partitions has been reduced.
- Additional logging.
> Clones and Image Restores (in Windows) now generate logs and can be viewed by clicking the 'Log' tab.
- Server Plus - Exchange 2010 mailbox restore improvements.
> Improved the authentication requirements when restoring mailboxes from Exchange 2010.
- Server Plus - New Exchange verification dialog.
> A new user friendly verification dialog for verifying exchange backups.
- Dynamic disks shown for all editions of Macrium Reflect.
> Dynamic disks were hidden from the Reflect main window for the Free and Standard editions of Macrium Reflect. Dynamic disks are now shown but imaging and cloning is not possible unless running the Professional or Server editions.
- Retain existing disk signature when cloning.
> When cloning to a pre-initialized disk, the existing disk signature is retained.
* Bug Fixes:
- Upgrade install license key improvements
> When running an upgrade msi install the currently installed license key is now pre-populated in the install dialog.
- XML File rename problem.
> When taking the XML rename function in Reflect, some irrelevant shortcuts may have been indicated as requiring updating. This has been resolved.
- Bug with File and Folder restore time remaining.
> Incorrect restore time remaining could be indicated when selecting the option to 'Only replace if different'. This has been resolved.
- Application error at start-up
> Reflect could crash at start-up if a bad sector is detected when reading the NTFS file system bitmap. This has been resolved.

* Improved speed copying Windows PE to USB rescue media.
* The speed of copying Windows PE boot files to USB flash drives has been increased.
* Bug Fixes:
- Explorer crash when opening files where the path is greater than 250 characters
> Windows Explorer could crash when accessing files where the path was greater than 250 characters. This has been resolved.
- Support for older CPUs without SSE2 instruction set
> The previous update to v5.3 of Macrium Reflect was incompatible with Pentium II/III and AMD Athlon XP CPUs. This has been resolved.

# New:
* Cancel confirmation on Clone and Restore
- A confirmation dialog has been added to prevent accidental cancelling of Clone and Restore operations.
* Volume label added to the USB drop down when building rescue media
- To aide detection of the correct USB media when building a bootable USB stick the Volume label of the drive has been added to the selection box.
# Bug Fixes:
* UEFI boot problem when shrinking a GPT partition.
- Some customers have reported that when restoring and shrinking a UEFI booting system that the message "0x0000225 winload.efi is missing". This has been resolved.
> If this issue affects you then please create fresh Windows PE rescue media after updating.
* Windows 8.1 Event error for ReflectService.exe
- The event "The description for Event ID 2 from source ReflectService cannot be found" was incorrectly posted to the Windows Event log in Windows 8.1. This has been resolved.

New in 5.2.6544:

Restore view loading speed increase
The time to populate the Restore view with image and backup files has been reduced.

Bug Fixes:

Linux CD incorrect image information displayed
On the initial page of the Linux restore wizard, Incremental and Differential image files were labelled as Full images. This has been resolved.
Image mounting problem from a password protected network share
When using Windows Explorer context menu to mount an image, if the share was password protected the the mount could fail. This has been resolved
Improved Installer reliability
Macrium Reflect installation could fail and rollback if the installation of the Reflect service failed due to Anti-Virus software blocking the installation. This has been resolved.
Problem with File and Folder backup due to Russian locale
When using Russian Windows, Files greater than 4GB in size would not combine to a single file in the restore process. This has been resolved.

# New:
* Windows PE drivers
- When creating the WinPE rescue media, specific drivers that could cause Windows PE to crash at startup are now excluded.
* USB rescue media
- Flash media drives formatted using 'USB-ZIP' are now supported
# Bug Fixes:
* ReDeploy
- Win8/8.1 redeploy failed with some mass storage drivers. This has been resolved.
* Pre-snapshot user script problem
- The VSS snapshot could begin before the "_before_snapshot_wait.bat" script had completed. This has been resolved
* Extended partition support
- Improved compatibly with non-sequential, Linux configured, extended partition layouts.
* PE 5 Auto restore
- When restoring a Windows system partition from within Windows the auto boot into PE 5 would not be available. This has been resolved.
* Encrypted NTFS filesystem clone
- Clones including encrypted NTFS filesystems could fail. This has been resolved

# Bug Fixes:
* USB rescue media
- Some USB pen drive configurations were not supported by the USB rescue media wizard. This has been resolved.
* Windows PE
- On specific windows XP configurations, the PE based rescue environment build can fail. This has been resolved.
* Image verification Problems
- A rare situation could cause Images created with v5.2.6504 to fail verification due to a race condition during image creation. This has been resolved.

# New:
* USB Rescue Media
- The creation of USB rescue media has been significantly improved and now includes support for external USB hard disks
* Backup Performance
- Backup performance has been improved by 30% or more.
* GRUB2 Support
- Images now include GRUB2 support for Linux systems
* Destination Volume name now shown in the backup log.
- To assist in the identification of backup disks where multiple disks use the same drive letter the target drive Volume name is now shown in the backup log.
* MS recovery partition
- The Windows MS recovery partition is now included when selecting 'Backup Windows' in Windows 8.0/8.1.
* Improved time remaining granularity
- When the time remaining for a backup is less than 3 hours the display will now include minutes.
# Bug Fixes:
* SMTP server port saving error
- Changes made to the SMTP server port in the Macrium Reflect defaults could fail to be saved. This has been resolved.
* Problem when shrinking a restored incremental image
- When shrinking a partition during an incremental image restore the restored file system could require 'chkdsk' to correct file system errors. This has been resolved
* An error occurred mounting the Windows Image File
- A corrupt .zip extraction could cause rescue media creation failure with the message "An error occurred mounting the Windows Image File". This has been resolved

# Bug Fixes:
* Additional error reporting
- If a backup failed due to the target directory being inaccessible then the error message wasn't sufficient to diagnose the cause. The message now includes the Windows error that corresponds to the failure.
* Incorrect driver architecture used when building Windows PE for the first time
- When manually adding drivers to the Windows PE rescue media build, the rescue wizard could load driver files for the wrong architecture (32 or 64 bit). This has been resolved

# Bug Fixes:
* Windows PE 3.1 build problems
- The Windows PE 3.1 rescue media build process could error with "An error occurred mounting the Windows Image File". This has been resolved

# New:
* Windows PE 5.0
- Macrium Reflect now includes the option to create Windows PE 5.0 rescue media. Windows PE 5.0 is based on Windows 8.1 and provides the latest Windows kernel and driver database. Windows PE 5.0 rescue media can be created with all Windows operating systems except for Windows XP.
* Prompt for comment
- To enter a new Image comment when running an existing backup definition, select the backup definition and take the 'Run Now' > 'Prompt' context menu option and click the 'Comment' button.
# Bug fixes:
* Error when burning rescue media
- When burning a rescue CD/DVD the process could incorrectly abort with the message 'Please insert erasable or empty CD/DVD media'. This has been resolved
* Linux rescue CD build problem
- Problem with the rescue media creation wizard when building Linux based media. This has been resolved