Nikon Camera Control Pro 2.37.1

Nikon Camera Control Pro software remotely controls most functions of Nikon digital SLRs from a computer that is connected via USB cable or through wired or wireless LAN using a wireless transmitter.

Advanced functions of the new Nikon D3 and D300, such as the Viewer for preview and selection of images before transfer to a computer, Liveview function, and Picture Control System, are supported.



Nikon Camera Control Pro also supports the workflows of Nikon’s exclusive photofinishing software, Capture NX (optional), and browser and viewer software, ViewNX.

Most settings of Nikon digital SLRs, which are connected via USB cables, such as exposure mode, shutter speed, and aperture, can be controlled remotely from a computer.

Wired or wireless LAN is also available when using a wireless transmitter. In addition to a direct transfer of images from a camera to a computer, all procedures from shooting to saving images are smoothly processed.

Enhanced viewer function enables thumbnail display of images stored in a computer.

Compatible with the new functions of the Nikon D3/D300

• Images in a camera buffer can be confirmed with a thumbnail or preview display on a computer before transferring, enabling the deletion of unnecessary images. This remarkably increases efficiency.
• Supporting the Liveview mode (Hand-held mode and Tripod mode) of the D3 and D300, it permits adjustment of the focus point and shutter release while confirming the image on a computer. In Tripod mode, focal-plane contrast AF on a desired point within a specific area is possible.
• It also supports the Picture Control System of the cameras. Picture Control parameters can be selected and adjusted on a computer, and custom curves (tone compensation data) can be created and registered
• 51-point AF can be controlled and displayed.
• Fine-tuning of the new white balance is available.

Integration with other Nikon software

• Support for the ViewNX browser and viewer software
• Support for Capture NX photo-finishing software

Features and Highlights

• Remote control of most Nikon digital SLR settings, including exposure mode, shutter speed, and aperture, from a computer.
• Operation by wired and wireless LAN when using a wireless transmitter.
• The direct transfer of images from a camera to a computer and workflow management of all procedures from shooting to saving images.
• Enhanced Viewer function enables thumbnail display of images stored on a computer.
• Images on a camera buffer can be confirmed or deleted with a thumbnail or preview display on a computer before transfer.
• Supports It also supports workflows from Nikon's exclusive photofinishing and browser software.
• Modes (Hand-held and Tripod) where the camera sensor is used to provide a real-time preview through the objective lens. LiveView support enables simultaneous adjustment of the focus point and/or shutter release, and confirmation of the image on a computer screen. In Tripod mode, remote selection of the desired autofocus point is possible.
• Supports the Picture Control system, which allows image parameters to be selected and adjusted on a computer, and custom curves (tone compensation data) to be created and saved back to the camera.

How to Use

• Install the software using the official Nikon installer
• Connect your Nikon camera via USB or network
• Launch the application and detect your camera
• Configure shooting settings from your PC interface
• Use live view mode to preview and compose shots
• Capture images remotely with full control
• Transfer and save images directly to your computer
• Adjust white balance, exposure, and focus remotely
• Monitor the camera battery and storage status
• Disconnect the camera safely after your session

FAQs

What is Nikon Camera Control Pro actually used for in real workflows?
Nikon Camera Control Pro is designed for tethered shooting, meaning you control a Nikon DSLR or mirrorless camera directly from your computer. It’s widely used in studio photography (product, fashion, portraits) where you need instant preview, precise control over settings, and the ability to save images directly to a PC instead of the camera.

What advantages does it have over shooting directly into the camera?
The biggest advantage is full remote control and live preview on a larger screen. You can adjust exposure, focus, white balance, and shooting parameters in real time, instantly review high-resolution shots, and streamline workflows by automatically transferring files to your computer or editing software.

Is Nikon Camera Control Pro still worth using in 2026?
Yes, but mainly for professionals. In 2026, it’s still relevant for tethered studio setups where precision and workflow efficiency matter. However, some users may prefer newer or lighter alternatives depending on their camera model and workflow, especially as wireless and cloud-based solutions become more common.

System Requirements

• OS: Windows 11, 10 (64-bit only)
• Processor: Intel Core i5 or higher
• RAM: Minimum 4 GB (8 GB recommended)
• Storage: 1 GB free disk space for installation
• Display: 1024 x 768 resolution or higher
• USB 3.0/2.0 port for camera connection
• Network support for compatible cameras

PROS

• Full remote control of Nikon DSLR settings
• Live view shooting from the computer
• Direct image transfer to PC storage
• Supports time-lapse and interval shooting
• Professional workflow and tethered support

CONS

• Paid software with no free version
• Limited compatibility with non-Nikon cameras
• Interface feels outdated and non-intuitive
• Occasional connection issues via USB
• Lacks advanced editing or batch tools

Note: 30-day trial version.

Also Available: Download Nikon Camera Control Pro for Mac

Download Nikon Camera Control Pro Latest Version Why is this app published on FileHorse? (More info)