Kruptos 2 6.2.0.3

Improvements:
* Faster booting when the system partition/drive is encrypted (typically by 10%). (Windows Vista/XP/2008/2003)
* Other minor improvements. (Windows, Mac OS X, and Linux)

Resolved incompatibilities:
* On computers with certain hardware configurations, resuming from hibernation failed when the system partition was encrypted. Note: If you encountered this problem, the content of RAM may have been saved unencrypted to the hibernation file. You can erase such data, for example, by decrypting the system partition/drive (select System > Permanently Decrypt System Partition/Drive) and then encrypting it again. (Windows Vista/XP/2008/2003)

Remark: As Microsoft does not provide any API for handling hibernation, all non-Microsoft developers of disk encryption software are forced to modify undocumented components of Windows in order to allow users to encrypt hibernation files. Therefore, no disk encryption software (except for Microsoft's BitLocker) can guarantee that hibernation files will always be encrypted. At anytime, Microsoft can arbitrarily modify components of Windows (using the Auto Update feature of Windows) that are not publicly documented or accessible via a public API. Any such change, or the use of an untypical or custom storage device driver, may cause any non-Microsoft disk encryption software to fail to encrypt the hibernation file. We plan to file a complaint with Microsoft (and if rejected, with the European Commission) about this issue, also due to the fact that Microsoft's disk encryption software, BitLocker, is not disadvantaged by this.
* Workaround for a bug in the BIOS of some Apple computers that prevented users from entering pre-boot authentication passwords and controlling the TrueCrypt Boot Loader. (Windows Vista/XP/2008/2003)

Bug fixes:
* When the system partition/drive is decrypted under Windows, the original partition table will not be restored. Note: This issue affected users who repartitioned an encrypted system drive and then decrypted it under Windows. (Windows Vista/XP/2008/2003)
* Other minor bug fixes. (Windows, Mac OS X, and Linux)

New features:
* Support for hibernation on computers where the system partition is encrypted (previous versions of TrueCrypt prevented the system from hibernating when the system partition was encrypted). (Windows Vista/XP/2008/2003)
* Ability to mount a partition that is within the key scope of system encryption without pre-boot authentication (for example, a partition located on the encrypted system drive of another operating system that is not running). (Windows Vista/XP/2008/2003)

Note: This can be useful e.g. when there is a need to back up or repair an operating system encrypted by TrueCrypt (from within another operating system).
* Command line options for creating new volumes. (Linux and Mac OS X)

Improvements:
* Increased speed of AES encryption/decryption (depending on the hardware platform, by 30-90%). (Windows)
* Faster booting when the system partition is encrypted. (Windows Vista/XP/2008/2003)
* When the system partition/drive is encrypted, the TrueCrypt Boot Loader is now stored in a compressed form and is, therefore, smaller. If a non-cascade encryption algorithm is used (i.e., AES, Serpent, or Twofish), the TrueCrypt Boot Loader is now small enough so that a backup of the TrueCrypt Boot Loader can be (and is) stored in first drive cylinder. Whenever the TrueCrypt Boot Loader is damaged, its backup copy is run automatically instead.

As a result of this improvement, the following problem will no longer occur: Certain inappropriately designed activation software (used for activation of some third-party software) writes data to the first drive cylinder, thus damaging the TrueCrypt Boot Loader. The affected users had to use the TrueCrypt Rescue Disk to repair the TrueCrypt Boot Loader. This will no longer be necessary after upgrading to this version of TrueCrypt (provided that the system partition/drive is encrypted using a non-cascade encryption algorithm, i.e., AES, Serpent, or Twofish).

Note: If your system partition/drive is currently encrypted using a non-cascade encryption algorithm (i.e., AES, Serpent, or Twofish), a backup copy of the TrueCrypt Boot Loader will be automatically stored in the first drive cylinder when you upgrade to this version of TrueCrypt.
* The minimum memory requirements for the TrueCrypt Boot Loader have been reduced from 42 KB to 27 KB (twenty-seven kilobytes). This allows users to encrypt system partitions/drives on computers where the BIOS reserves a large amount of memory. (Windows Vista/XP/2008/2003)
* Many other minor improvements. (Windows, Mac OS X, and Linux)

Resolved incompatibilities:
* On some computers, when performing the system encryption pretest, Windows failed to display the log-on screen. This will no longer occur. (Windows Vista/XP/2008/2003)

Bug fixes:
* On some systems, drive letters were not correctly assigned to newly mounted non-system volumes. This will no longer occur. (Windows)
* Many other minor bug fixes. (Windows, Mac OS X, and Linux)

Improvements:

* The memory requirements for the TrueCrypt Boot Loader have been reduced by 18 KB (eighteen kilobytes). As a result of this improvement, the following problem will no longer occur on most of the affected computers: The memory requirements of the TrueCrypt Boot Loader 5.0 prevented users of some computers from encrypting system partitions/drives (when performing the system encryption pretest, the TrueCrypt Boot Loader displayed the following error message: Insufficient memory for encryption).


Bug fixes:

* On computers equipped with certain brands of audio cards, when performing the system encryption pretest or when the system partition/drive is encrypted, the sound card drivers failed to load. This will no longer occur. (Windows Vista/XP/2003)
* It is possible to access mounted TrueCrypt volumes over a network. (Windows)
* TrueCrypt Rescue Disks created by the previous version could not be booted on some computers. This will no longer occur. (Windows Vista/XP/2003)

Note: If your TrueCrypt Rescue Disk created by TrueCrypt 5.0 cannot be booted on your computer, please upgrade to this version of TrueCrypt and then create a new TrueCrypt Rescue Disk (select 'System' > 'Create Rescue Disk').
* Many other minor bug fixes. (Windows, Mac OS X, and Linux)

New features:

Ability to encrypt a system partition/drive (i.e. a partition/drive where Windows is installed) with pre-boot authentication (anyone who wants to gain access and use the system, read and write files, etc., needs to enter the correct password each time before the system starts). For more information, see the chapter System Encryption in the documentation. (Windows Vista/XP/2003)
Pipelined operations increasing read/write speed by up to 100% (Windows)
Mac OS X version
Graphical user interface for the Linux version of TrueCrypt
XTS mode of operation, which was designed by Phillip Rogaway in 2003 and which was recently approved as the IEEE 1619 standard for cryptographic protection of data on block-oriented storage devices. XTS is faster and more secure than LRW mode (for more information on XTS mode, see the section Modes of Operation in the documentation).
Note: New volumes created by this version of TrueCrypt can be encrypted only in XTS mode. However, volumes created by previous versions of TrueCrypt can still be mounted using this version of TrueCrypt.
SHA-512 hash algorithm (replacing SHA-1, which is no longer available when Note: To re-encrypt the header of an existing volume with a header key derived using HMAC-SHA-512 (PRF), select 'Volumes' > 'Set Header Key Derivation Algorithm'.


Improvements, bug fixes, and security enhancements:

The Linux version of TrueCrypt has been redesigned so that it will no longer be affected by changes to the Linux kernel (kernel upgrades/updates).
Many other minor improvements, bug fixes, and security enhancements. (Windows and Linux)

Improvements:
- Full support for custom screen DPI settings. (Windows, GUI)
- Other minor improvements. (Windows and Linux)

Bug fixes:
- Fixed bug that in some cases caused the 'Safely Remove Hardware' function to fail.
- In Windows Vista, it is now possible to read data from file-hosted TrueCrypt volumes located on UDF-formatted media mounted in read-only mode.
- All Volume Creation Wizard GUI elements are now correctly displayed on systems with custom DPI settings. (Windows, GUI)
- Other minor bug fixes. (Windows and Linux)


Security improvements:
- Linux: When running without administrator privileges, TrueCrypt automatically attempts to elevate its access rights (if necessary) using the sudo command. The Linux version of TrueCrypt no longer supports the set-euid root mode of execution. These changes also prevent all discovered and undiscovered (if any) security issues related to the set-euid root mode of execution, including an issue affecting all previous Linux versions of TrueCrypt where a local non-administrator user could cause a denial of service or gain administrator privileges.


Miscellaneous:
- If dismount is forced on a TrueCrypt volume when TrueCrypt runs in traveller mode, the TrueCrypt driver will not be unloaded when TrueCrypt exits (it will be unloaded only when the system is restarted or shut down). This prevents various problems caused by a bug in Windows (for instance, it would be impossible to start TrueCrypt again as long as there are applications using the dismounted volume). (Windows)

New features:
- Full compatibility with 32-bit and 64-bit Windows Vista:
- Support for User Account Control (UAC).
- All .sys and .exe files of TrueCrypt are now digitally signed with the digital certificate of the TrueCrypt Foundation, which was issued by the certification authority GlobalSign.
- When moving the mouse on a single-CPU computer while reading or writing data to a TrueCrypt volume, the mouse pointer stopped moving for a second every few seconds. This will no longer occur. (Windows Vista issue)
- Other minor compatibility-related changes.
- TrueCrypt volume is automatically dismounted if its host device is inadvertently removed.
Important: You should always dismount the volume in TrueCrypt and then use the "Safely Remove Hardware" function (built in Windows) before you physically remove the host device (e.g. a USB flash drive).
- Support for devices and file systems that use a sector size other than 512 bytes (e.g., new hard drives, USB flash drives, DVD-RAM, MP3 players, etc.)
- Support for devices with a GPT partition table (GUID partitions). (Windows Vista/2003/XP)
- After a partition is successfully encrypted, the drive letter assigned to it (if any) is automatically removed. (Windows)
- Volume name (label) is displayed in device/partition selector. (Windows)
- New hotkey: 'Wipe Cache'. (Windows)
- New command line switch '/q background' for launching the TrueCrypt Background Task. (Windows)

Improvements:
- Portions of the TrueCrypt device driver redesigned.
- Maximum allowed size of FAT32 volumes increased to 2 TB (note that NTFS volumes can be larger than 2 TB).
- Traveller Disk Setup improved. (Windows)
- Volumes hosted on read-only media will always be mounted in read-only mode. (Windows)
- Improved support for big-endian platforms.
- Other minor improvements (Windows and Linux)

Bug fixes:
- The built-in FAT format facility now functions correctly on big-endian platforms.
- Improved handling of partitions and devices during volume creation. (Windows)
- Improved handling of low-memory conditions. (Windows)
- Fixed bug that rarely caused system errors when dismounting all volumes. (Windows)
- Tray icon is recreated when Windows Explorer is restarted (e.g. after a system crash).
- Other minor bug fixes (Windows and Linux)

Security improvements:
- Improved security of set-euid mode of execution. Volume can be dismounted only by the user who mounted it or by an administrator (root). (Linux)

Removed features:
- It is no longer possible to create new volumes encrypted with 64-bit-block encryption algorithms (Blowfish, CAST-128, and Triple DES). 64-bit block ciphers are being phased out. It is still possible to mount such volumes using this version of TrueCrypt. However, it will not be possible to mount such volumes using TrueCrypt 5.0 and later versions (this applies also to volumes encrypted with AES-Blowfish and AES-Blowfish-Serpent, which have been in the process of being phased out since TrueCrypt 4.1). If you have such a volume, we recommend that you create a new TrueCrypt volume encrypted with a 128-bit-block encryption algorithm (e.g., AES, Serpent, Twofish, etc.) and that you move files from the old volume to the new one.

Bug fixes:

* Writing to a TrueCrypt volume under Linux no longer causes the system to stop responding under certain conditions.
* Occasional application errors no longer occur when selecting a file (Windows XP SP2 issue).
* Fixed bug that caused installation of the TrueCrypt driver to fail under certain configurations of 64-bit Windows.
* TrueCrypt volumes mounted in a remote session under Windows 2000 can now be accessed.
* TrueCrypt Volume Creation Wizard no longer blocks hot keys of certain applications. (Windows)
* Other minor bug fixes (Windows and Linux)


Improvements:

* It will not be required to reinstall the TrueCrypt kernel module after every minor Linux kernel update.
* Support for latest Linux kernel (2.6.17)
* Other minor improvements (Windows and Linux)


Security improvements:

* The Linux version of TrueCrypt now uses the TrueCrypt Random Number Generator (ported from the Windows version of TrueCrypt) instead of using only the Linux built-in random number generator. (This change was necessary due to a flaw in the Linux built-in random number generator: Data from the mouse and keyboard, which are the most important sources of random data, are not read by the Linux built-in random number generator when the user has only a USB mouse/keyboard.)
Note: The Linux version of TrueCrypt still uses the Linux built-in random number generator. However, it is now merely one of the data sources used by the TrueCrypt random number generator.
* Interactive mount mode, which allows the user to avoid passing sensitive parameters via command line. (Linux)
* TrueCrypt volume is unmapped if mounting it to a directory fails. (Linux)
* When the Never Save History option is enabled, TrueCrypt sets its current directory to the users home directory (in traveller mode, to the directory from which TrueCrypt was launched) after a container or keyfile is selected via the Windows file selector. Therefore, the Windows file selector will not remember the path of the last selected container or keyfile. (Windows)


Miscellaneous:

* Released under the TrueCrypt Collective License Version 1.0

New features:
- TrueCrypt volumes can now be created under Linux.
- Ability to create a dynamic container whose physical size (actual disk space used) grows as new data is added to it. (Dynamic containers are pre-allocated NTFS sparse files).
- Volume passwords/keyfiles can be changed under Linux.
- Keyfiles can be created under Linux.
- Volume headers can be backed up and restored under Linux.
- Multiple keyfiles can be selected in the file selector by holding the Control (Ctrl) or Shift key (Windows).
- It is now possible to enable and directly set keyfiles by dragging the icon of keyfile(s) or of keyfile search path(s) to the password entry window (Windows only).
- New Linux command line option: -u, --user-mount, which can be used to set default user and group ID of the file system being mounted to the user and group ID of the parent process. Some file systems (such as FAT) do not support user permissions and, therefore, it is necessary to supply a default user and group ID to the system when mounting such file systems.
- The build.sh script can now perform automatic configuration of the Linux kernel source code, which is necessary in order to compile TrueCrypt on Linux. Note that this works only if the installed version of the kernel enables/supports it.
- TrueCrypt volume properties can be viewed under Linux.
- New Mount Option: 'system'. It is possible to place paging (swap) files on a TrueCrypt volume that is mounted with this option enabled. Thus, it is possible to use TrueCrypt to on-the-fly encrypt a paging file. (Windows, command line usage)
- New Mount Option: 'persistent'. A volume mounted with this option enabled is not displayed in the TrueCrypt GUI and is prevented from being auto-dismounted (Dismount All will not dismount the volume either). (Windows, command line usage)

Improvements:
- It is now possible to mount a single TrueCrypt volume from multiple operating systems at once (for example, a volume shared over network), provided that the volume is mounted as read-only under each system (Windows).
- Current directory is never left set to a removable device after a file (e.g., a container, keyfile, header backup) stored on it is selected via file selector in TrueCrypt. Therefore, it will be possible to Safely Remove the device in such cases. (Windows)
- Improved security of set-euid mode of execution (Linux).
- Other minor improvements

Bug fixes:
- It is now possible to dismount volumes that cannot be opened (for example, after disconnecting and reconnecting a USB flash drive formatted as NTFS containing a mounted TrueCrypt volume).
- Fixed bug that sometimes caused the mount process to fail under Linux when one or more TrueCrypt volumes were already mounted.
- Command line argument buffer is now wiped upon exit (Windows, command line usage).
- Other minor bug fixes