Macrium Reflect 7.1.2963

* Addtional Windows Event log messages
- Server Edition only: A failure message was not posted to the Windows Event log for some causes of image failure. This has been resolved.
* Windows PE CD/DVD boot error
- The Windows PE rescue CD/DVD could fail to boot on some systems. This has been resolved.

# New
* PrimoBurner update
- Macrium Reflect now uses CD/DVD burning engine PrimoBurner 3.6. This has support for a greater range of hardware and resolves the rare issue of occasional hangs seen with the previous version.
# Bug fixes:
* Scheduled task display error
- Incremental and Differential backup jobs could incorrectly be shown as Full in the 'Scheduled Backups' tab. This has been resolved.
* WAIK Time-zone
- Creation of WAIK based rescue media may not take the time-zone into account and image files could appear with the wrong time. This has been resolved.
* Uninstall Shell Registry Extensions
- When uninstalling, approved shell extensions would be removed. This has been resolved.
> Note: This fix applies to the removal of full installs of this version and later.
* Installation Issue
- The Macrium Reflect installer would encounter issues on machines with no network adaptors. This has been resolved.
* Linux Rescue CD Volume Names
- Linux Rescue CD could show the same volume label for all volumes. This has been resolved.
* Menu Consistency
- Some menu items have been re-ordered for consistentency.
* WinPE WAIK Taskbar
- The Taskbar under WAIK WinPE rescue media could occasionally not be visible. This has been resolved.
* ReDeploy Active Service
- Macrium ReDeploy was not catering for some vendor active service settings. This has been resolved.
* VSS Debug Logging
- Enhanced VSS debug logging was not present even if selected in the Advanced Properties. This has been resolved.
* File & Folder Search Cancel
- Cancelling or stopping a File & Folder Search for restore could cause Reflect to hang in certain circumstances. This has been resolved.
* Rescue Media Creation
- The creation of rescue media was not catering for edge cases of linking USB root hubs to USB3 host controllers. This has been resolved.
* PE Explorer
- PE Explorer, location toolbar lost on escape keypress in location editbox. This has been resolved
* Restore UI
- Image and backup files could remain in the list of files even if the folder was removed from the search list. This has been resolved
* Rescue media Wizard
- The horizontal scrollbar was missing from the Rescue Wizard drivers page device list. This has been resolved

# New:
* File & Folder Log clipboard copy
- Users can now copy a CSV list of files either backed up or restored in the Macrium Reflect log view.
* Log Image File Sizes
- Backup file sizes are now included in the backup logs.
* Backup Drive Selection
- The drives/partitions selected in the main application window are now remembered between runs of Macrium Reflect.
# Bug fixes:
* Startup Issue
- Macrium Reflect could hang at startup if the file system contained an NTFS MFT record with a attribute list > 64K in size. This has been resolved.
* File & Folder Search
- When cancelling a File and Folder search operation for restore, Macrium Reflect could generate a dump report. This has been resolved.
* Licensing
- When contacting the license server, Macrium Reflect could crash on button clicks. This has been resolved.
* Email Attachment Images
- Success/fail graphics were omitted from email log attachments. This has been resolved.
* Toolbar/Status bar State
- The state of the toolbars and status bar were not being saved between runs of Macrium Reflect. This has been resolved.
* Installer issue
- In rare cases, during an upgrade from existing v4 install, the Image Mounting service would prevent the install from completing. This has been resolved.
* Fix Boot Problems Issue
- An edge case where the Fix Boot Problems option under WinPE could reboot the machine when manually specifying an operating system path. This has been resolved.

# Bug fixes:
* Installer:
- When updating Reflect, if the installer is used instead of the normal patch procedure, email settings will be lost. This has been resolved.

* Email attachments:
- Byte order marker being rendered in emailed log attachments in some email clients. This has been resolved.

* Image to DVD:
- In some Vista/Win7 installs omaging to DVD could cause an 'Invalid (not writeable)' error. This has been resolved.

* VSS:
- VSS snapshot creation could fail if a VSS writer component is configured to use a volume that no-longer exists on the system. This has been resolved.

* Unattended System restore:
- Restore with auto reboot into the rescue environment could fail if the local drives were re-sequenced by Windows PE. This has been resolved.

* Rescue environment:
- Hitting escape after clicking the taskbar may result in it being hidden. This has been resolved.

* Rescue environment:
- The list of existing images was not always populated when booted into WinPE recovery. This has been resolved.

* File and folder backup incremental and differential speed isssue:
- An issue where the NTFS permissions setting in full backups was not being honoured in incremental backups. This has been resolved.

* ReDeploy 64 bit issue
- A very infrequent issue where ReDeploy was not setting the correct drivers on 64 bit platforms with certain chipsets. This has been resolved.

* Windows Home Server
- Macrium Reflect Standard and Professional Editions now fully support Windows Home Server platform
* File And Folder Backup - folder filter mask specification improvements
- The file and folder filter has been improved to include the full path when matching. The previous filter methods are still valid.
* Free installer registration details
- The Macrium Reflect Free Edition installer now allows for the modification of existing registration details.
* Improved USB3 device detection
- Macrium Reflect has been extended to take advantage of more USB3 controllers and hubs
# Bug fixes:
* Alternate Locations hint text
- After adding a folder as an alternate backup location, clicking into the folder edit box caused the hint text to not be selected. This has been resolved.
* Time remaining countdown
- An infrequent issue was raised where the time remaining at the end of a backup was being misreported as 1 second. This has been resolved.
* Autocomplete edit box visible during backup
- Pressing any key during a backup process would result, incorrectly, in the locations autocomplete edit box to become visible. This has been resolved.
* Installer Return button
- The button on the 'License Already Installed' error dialog was Cancel and should have been OK and Cancel. This has been resolved.
* Interactive backup auto shutdown
- Automatic shutdown of interactive backups would not initiate as Macrium Reflect was still running. This has been resolved.
* Rescue media USB device selection
- When creating a rescue environment to USB pen drive media, it was possible to select a blank USB device from the list. This has been resolved.
* Scheduled task deletion confirmation
- Macrium Reflect was not prompting the user for confirmation of scheduled task deletion. This has been resolved.
* Rescue media device detection
- When creating the rescue environment, Macrium Reflect could include devices that were not relavant to the WinPE environment. This has been resolved.
* Rescue media update driver
- Macrium Reflect would allow the user to specify (or search) the WindowsInf folder for drivers, which can lead to incorrect or unsupported drivers being included in the rescue media. This has been resolved.
* WinPE Unsupported Devices dialog
- The Unsupported Devices dialog in WinPE was displaying devices which were unrelated to the process of backup/restore. This has been resolved.

# Bug fixes:
* Windows PE network config issue
- The network configuration dialog in Windows PE could fail to set the second and subsequent Network Interface Cards. This has been resolved. If this issue affects you then please build fresh Windows PE rescue media after updating
* Crash during cloning operation
- A crash could occur at the end of a cloning operation if the source file system had errors in the NTFS $bitmap file. This has ben resolved.
* Free Edition Windows PE startup error
- For a few customers, the Windows PE rescue media could abort at startup. This has been resolved. If this issue affects you then please build fresh Windows PE rescue media after updating
* Free Edition startup issue
- A few customers have reported a program crash at startup. This has been resolved.
* Error reporting dialog improvement
- In the event of a program error, the error reporting message box would sit and wait for a response. This is now an auto canceling dialog if Macrium Reflect is running as a scheduled task.
* Free Edition installer registration details
- When re-installing the Free Edition of Macrium Reflect existing registration details were not remembered. This has been resolved.

# Bug fixes:
* Error in destination path when editing an existing backup defintion
- When editing an existing backup definition an incorrect path could be populated in the destination field. This has been resolved.
* A local disk may not be detected
- Some customers have experienced a problem with disks missing from the Reflect backup tab. This was caused by an out of sync registry entry and has been resolved.

* Linux rescue CD update.
- Improved Linux CD restore performance and compatibility
* Automatic conversion from MBR to GPT.
- Pro and Server editions. If an MBR partition is restored to an empty disk and expanded to > 2TB in size then the target disk is now automatically converted to GPT to accommodate the new partition size.
# Bug fixes:
* Installer update issue.
- When upgrading using the Macrium Reflect installer, if the current installation was not on drive 'C' then the upgrade would not install to the same path as the existing installation. This has been resolved.
* Restore defaults.
- The global default setting 'Restore MBR' was not honoured when restoring a disk image. This has been resolved.
* Image file deletion error.
- If an image file that was split (e.g, into 4GB chunks due to FAT32) and was deleted using the Reflect GUI, this could cause a program crash. This has been resolved.
* XML validation error.
- Disks numbered > 9 could cause an XML validation error. This has been resolved.
* Windows PE (WAIK) download retry.
- If the WAIK download timed out then subsequent retries could time-out at the same point during the retry. This has been resolved.
* Linux rescue CD disk matching
- When restoring with the Linux rescue CD the incorrect disk could be defaulted for the restore process. This occurred for a a very specific sequence of disks and disk signatures and has been resolved.

# Network authentication
* Improved network authentication reliability in application defaults
# INF file parser improvements
* Improved INF file parser to support QLogic fibre channel controllers

* Added unattended restore for the Windows Automated Installation Kit (WAIK).
- Customers using the MS WAIK to create a Windows PE rescue CD can now initiate an unattended restore.
* New option to remove user files on uninstall.
- The uninstaller now gives the option to remove all user files, not including images or backup files, during application removal. In the Control Panel take the 'Modify' then 'Remove' for this option.
* Increased the total number of supported attached local disks to 40.
- Macrium Reflect now supports up to 40 attached local disks for image and restore.
* Improved drive letter allocation logic when restoring.
- If drag and drop is used for restoring to a different partition, the drive letter of the partition being replaced is used for the newly restored partition by default.
* Additional logging for driver injection.
- A file is now created 'media_drivers.log' in the Macrium Program data folder that logs the auto driver injection process for Windows PE.
* USB rescue media enhancements.
- Support for a wider range of USB flash media types.

# Bug fixes:
* 'Disable VSS Writers' option not available.
- This option in the default properties was greyed out for Server 2003. This has now been enabled.
* Error in test email message box text.
- Reported as being sent to the 'sender' not the 'recipient'. This has been resolved .
* Server SBS 2011 Widows Event log issues.
- The channel used to report Macrium Reflect event logs has been renamed to avoid a conflict with MS Exchange.
* Error in image path name during restore.
- If the path to an image file had multiple consecutive spaces this could cause the restore process to be unable to locate the image file. This has been resolved.
* Linux Rescue CD image date error.
- Encrypted image files would show a backup date of 1/1/70. This has been resolved.